Weed Guard Surf / Weedless
Passer Epic surfski i kompositt med SURF eller WEEDLESS ror.
Festes med dobbeltsidig tape for "engangsbruk", se under for permanent montering.
7040518522956
249,-
Sjekk lagerstatus i butikk
Lagerstatus i nettbutikk: På lager
WEED GUARD INSTRUCTIONS
- Weed guards are designed to deflect weeds away from the rudder.
- Weed guards need to be epoxied onto the boat with a waterproof “marine” grade epoxy.
- West Marine sells Starbrite Quick Set Epoxy Glue that will work perfectly. However, keep in mind that most hardware stores will sell a type of “marine” grade epoxy that will work.
NO WARRANTY IS GIVEN TO WEED GUARDS THAT ARE LOST!
WEED GUARD INSTALLATION
For a removable solution, tape the flanges down onto the hull using a layer of clear packaging tape. This typically holds for a short time.
If you plan on using the weed guard all the time, we recommend that you take the time to epoxy it permanently following the steps below:
- For a permanent solution, line up the weed guard and draw a light outline onto the ski. Use sand paper to lightly scuff this area to increase the surface area and provide texture for epoxy to bond to.
- Do not sand though the epoxy/fibers. You can then scuff the mating surface lightly. Use epoxy to attach it to the ski.
